Open post

Hiltron Completes Multi-Antenna Satellite Link System for German Broadcast News Network

Hiltron Completes Multi-Antenna Satellite Link System for German Broadcast News Network

Backnang, Germany, May 25th, 2021 – Hiltron Communications, a globally active satellite system integrator, manufacturer and distributor, announces the completion of a satellite uplink and downlink system for one of Germany's largest television news broadcasters. The project includes six antennas and related control infrastructure which will be used to communicate with the network's associate organisations around the world.

"Following successful acceptance, we created a solution which integrates fully into the news production workflow," says Hiltron managing director Antonio Monteverde. "Easy and efficient operation were essential requirements. The antennas are located on a city-centre rooftop earth station and operated via remote links from the network's master control room. Hiltron software allows the system to be supervised via a single browser-based display screen showing all relevant performance parameters, confidence lights and alerts. Most important of all, de-icers in the antenna panels can be activated automatically if the rooftop temperature creates any risk of freezing."

 

"All six of the new antennas will be used to capture incoming signals", details Hiltron project manager Guy Van Bambeke. "Five of the reflectors are from General Dynamics, one being 3 metres in diameter and four being 3.7 metres. The sixth is a 2.7 metre Laminas dish which we have equipped to capture simultaneous feeds from three orbital positions, in this case 7 degrees east, 13 degrees east and 19.2 degrees east. Each antenna is on a fixed mount.

"We have also refurbished three existing antennas which will function both as uplinks and downlinks. That part of the project included the provision and integration of Hiltron ACU antenna control units which are used to control the dish azimuth and elevation. Each comprises a standalone unit contained in a weatherproofed outdoor housing, remotely operated via an IP data stream from a standard PC. Once a satellite is selected, precise access parameters can be determined by pressing a single button.

"Last and not least, we have integrated 13 Swedish Microwave low noise block downconverters. These are high-performance units which ensure the received data conforms fully to broadcast specification."

Hiltron ACU antenna control units are designed to control three-axis motorised antennas. The antenna control unit and associated motor-control electronics are contained in an IP65-rated weatherproof outdoor housing with a hinged front access port secured by dual key screws. Each control unit can be operated from a PC running a graphic user interface compatible with standard web browsers. The control GUI displays all the information required to set and maintain azimuth, elevation and polarisation, including current and target positions plus a database of potential accessible satellites.

About Hiltron 

Hiltron Communications (www.hiltron.de) is a globally active system integrator, manufacturer and distributor in the field of satellite and wireless communication. The company operates from modern purpose-built headquarters at Backnang near Stuttgart. On-site facilities include a large technical operations area with high access doors and ceiling, capable of accommodating satellite-link vehicles and their roof-mounted antennas.

Contact for further information at Hiltron 

Antonio Monteverde

Tel: +49 (0)7191 343 570 | Email: antonio.monteverde@hiltron.de

Hiltron Communications, Emil-Rathenau-Str., 71522 Backnang, Germany

Tel: +49 (0)7191 343 570 | Fax: +49 (0)7191 3435 750 |

Open post

Chris Nairn Joins ATG Danmon as Sales Director

Chris Nairn Joins ATG Danmon as Sales Director

Christopher_Nairn

Accompanying image of Chris Nairn.

Letchworth, Hertfordshire, UK March 5th, 2021 – Reporting to Managing Director Russell Peirson-Hagger, he joins from Bang & Olufsen Pro AV where he was Sales Director, Strategic Enterprise Partner Programme.

Chris Nairn began his broadcast industry career at Quantel followed by seven years in sales management roles with Sony Professional Solutions Europe. In 2016 he joined Grass Valley as Regional Sales Manager, Northern Europe, before joining Bang & Olufsen.

"We are very pleased to welcome Chris into the company," Russell Peirson-Hagger comments. "His long career in sales roles with some of the most innovative companies in the industry has given him an ideal professional background for this position. The role includes prospecting for new clients across the broadcast, post production, corporate, educational and wider AV sectors. Chris will also be responsible for gathering information on business trends with a view to developing new services, products and distribution channels."

"Advances in the quality, versatility, functionality and cost-efficiency of video and audio production equipment during recent years have created great opportunities right across the media business," Chris Nairn adds. "Remote production technology and IP-connectivity are in greater demand than ever. This became more evident during 2020 as organisations implemented new working practices allowing them to operate under the changing conditions. Our focus as system integration specialists is on partnering with our customers to create solutions which meet their current needs while at the same time allowing expansion to accommodate future operational or technical requirements. I look forward to building on ATG Danmon's proven experience and its well-earned reputation as a company which delivers on time and on budget."

Contacts for further information

ATG Danmon: Russell Peirson-Hagger

Email: russell.peirson-hagger@atgdanmon.co.uk

Tel: +44 (0)1462 485 444

Danmon Group United Kingdom, Unit 5, Oakfield Business Corner, Works Road, Letchworth SG6 1FB, UK

Tel: +44 (0)1462 485 444

Fax: +44 (0)1462 485 777

Web: www.atgdanmon.co.uk/ | Twitter: @ATGDanmon

Open post

Hiltron Communications Expands Product Portfolio

Hiltron Communications Expands Product Portfolio with Formation of ESA Microwave GmbH

Backnang, Germany, January 25th, 2021 – Hiltron Communications, a globally active satellite system integrator, manufacturer and distributor, announces the addition to its product portfolio of microwave feed systems for ground station antennas and high performance microwave components.

Having recently purchased the assets of the former ESA Microwave Solutions GmbH, Hiltron has acquired the know-how to design, develop, manufacture and test feed systems and microwave components for the bands from S to Ka, including band combination for multi-band feeds. Hiltron can now offer multi-band feed systems for new antennas as well as retrofit and upgrade of feeds for existing antennas.

Hiltron_HMAM_motorised_satellite_communications_antenna_system_incorporating_an_ESA_Microwave_feed_horn

"ESA's customised feed systems and high performance microwave components complement our own range of products for the ground station market sector," comments Hiltron's managing director Antonio Monteverde. "With our in-house design and development capabilities, we are now able to offer motorised antenna mounts, antenna control units, tracking and feed systems for nearly any type of antenna reflector. We have relocated development and manufacturing of the new product line into a newly stablished subsidiary, ESA Microwave GmbH. My colleague Joachim Kaercher will supervise the corporate activity of ESA Microwave GmbH as managing director in addition to his role as Hiltron's financial director."

About Hiltron 

Hiltron Communications (www.hiltron.de) is a globally active system integrator, manufacturer and distributor in the field of satellite and wireless communication. The company operates from modern purpose-built headquarters at Backnang near Stuttgart. On-site facilities include a large technical operations area with high access doors and ceiling, capable of accommodating satellite-link vehicles and their roof-mounted antennas.

Contact for further information at Hiltron 

Antonio Monteverde

Tel: +49 (0)7191 343 570 | Email: antonio.monteverde@hiltron.de

Hiltron Communications, Emil-Rathenau-Str., 71522 Backnang, Germany

Tel: +49 (0)7191 343 570 | Fax: +49 (0)7191 3435 750 |

Open post

ATG Danmon Completes Studio Relocation and Modernisation for International News Agency

ATG Danmon Completes Studio Relocation and Modernisation for International News Agency

Multiscreen_Display_and_Opereational_ATG
Accompanying image shows the multiscreen display and operational desks for master control.


London, UK, February 3th, 2021
 – ATG Danmon (www.atgdanmon.co.uk) announces the completion of new broadcast television production facilities for one of the largest and longest established global news agencies. The project included the design and integration of two new studios plus associated galleries and a master control room.

"This assignment coincided with a relocation to new premises in London's Canary Wharf financial hub," says ATG Danmon Managing Director Russell Peirson-Hagger. "The new studios form the UK core of a global service the agency offers to television and radio broadcasters in addition to its role as an international news provider. We partnered closely with the studio management team from the initial design phase through to system completion, testing and staff training. Cable prefabrication was performed at our Letchworth headquarters prior to the onsite build. New equipment installed included power-efficient LED lighting, Ross routing and RTS talkback. We also integrated cameras from the agency's former location."

"We have installed a 12G SDI routing core which is configured for HD but can also handle UHD if required at any time in the future," adds ATG Danmon Head of Systems Integration Jonathan Hughes. "At its core are a latest-generation Ross Ultrix router and Ross Carbonite Ultra vision mixer which we recommended to replace ageing third-party equipment. Representatives from the agency came with us to Ross Video's UK facility in Reading and were greatly impressed by the demonstration. Carbonite is an HDR-capable 3 M/E UHD mixer with a versatile control panel and a very compact processor. We have also upgraded the graphics and character generation to a Ross XPression which supports perspective-based image manipulation and real-time animation. This includes a MOS software gateway with an offline render engine."

Audio infrastructure includes Dante audio-over-IP networking which ATG Danmon recommended and integrated. This is bridged to the Ultrix router which performs the embedding and distribution switching. ATG Danmon upgraded the intercom system to an RTS Odin which can handle up to 128 ports in a single 1 U chassis with support for up to eight such units.

Being very news focused, the agency has many incoming audio contribution feeds so ATG Danmon integrated a SIP-based server from Broadcast Bionics with Dante emerging from the other side. This is currently configured for eight lines which are used for IFB talkback and contribution to live on-air shows.

For the Studio A gallery, ATG Danmon integrated a main production desk with an embedded Ross Carbonite Ultra. Behind this is a journalist desk with Avid iNews terminals and Autocue teleprompt control. Both desks face a wall-mounted array of NEC UHD video monitors in multiscreen configuration. A desk with an integrated Allen & Heath audio mixer was also populated and connected into the system. This faces a NEC multi-screen monitor.

Studio B is the smaller of the two studios. For its production gallery, ATG Danmon integrated a desk equipped for graphics, vision mixing, newsroom-computer and Panasonic robotic camera control. An audio mixer is located on the right. The monitor wall display has essentially the same configuration as that in the Studio A production gallery.

The project was completed on schedule and within budget.

Contacts for further information

ATG Danmon: Russell Peirson-Hagger

Email: russell.peirson-hagger@atgdanmon.co.uk

Tel: +44 (0)1462 485 444

Danmon Group United Kingdom, Unit 5, Oakfield Business Corner, Works Road, Letchworth SG6 1FB, UK

Tel: +44 (0)1462 485 444

Fax: +44 (0)1462 485 777

Web: www.atgdanmon.co.uk/ | Twitter: @ATGDanmon

Open post

Apantac appoints Danmon for representation in Denmark, Norway & Sweden

Apantac appoints Danmon for representation in Denmark, Norway & Sweden

Apantac appoints Danmon for representation in Denmark, Norway & Sweden
The distribution agreement officially starts on the 3rd of november 2020.

Apantac, an internationally recognized manufacturer of multiviewers, video walls, extension and signal processing solutions is boosting its presence in Denmark, Norway and Sweden with the appointment of its new distribution partner, Danmon Group.

Apantac’s award-winning multiviewers and signal processing solutions are suited for both the broadcast and the professional AV markets and the company’s entire range of products will be represented by Danmon in the Scandinavian region.

Danmon’s services include system design, installation, technical services and support delivering solutions for a vast range of applications including traditional broadcast, film, post production, as well as the globally expanding ProAV market including educational institutions, control rooms, houses of worship, medical and more.

“Danmon embodies our commitment to our customers and we are looking forward to working with the team. Their experience and breadth of localized teams will be a great asset in helping to build Apantac’s presence in the region,” comments Michel Rudelle, EMEA Regional Manager of Apantac.

 “We are very pleased to be joining Apantac’s global distribution network and integrating its technology and solutions into our projects,” comments Christoffer Kay, Chief Operating Office of Dan Technologies A/S. “Apantac’s vast range of products fit neatly with our system and integration work and our customers will benefit from their reputable products.”

About Apantac LLC

Apantac LLC (www.apantac.com) is a leading designer and developer of high quality and cost effective multiviewers, video walls, matrices, extenders, openGear solutions and signal processing equipment. The Apantac product line has been specifically designed to provide users with flexible and innovative technology solutions for the broadcast and ProAV industries.

Apantac was founded in 2008 and is a privately held company with its headquarters located in Portland, Oregon, USA.

For more information about Apantac’s products & services please visit: www.apantac.com. For sales, please visit the website, or email thomas.tang@apantac.com. More information: Facebook, Twitter, and Linkedin.

About Danmon

Established in 1981, the Danmon Group has developed to be a long-established broadcast and media solutions provider combining in-depth experience with the ability to implement new technology quickly and efficiently. With local offices in several countries they operate globally and act locally.

The group covers a wide range of competencies and skills required in today’s advanced broadcast and media sector within traditional broadcast, IT/IP, RF, satellite, audio over IP, virtual studios, archive & storage, OTT and streaming platforms as well as API and workflow management software and high-end AV solutions for corporate and institutional customers. For more information please visit: https://www.danmon.com/

Contacts for further information

Danmon Group

Email: info@danmon.dk

Tel: +45 4596 8800

Web: www.danmon.com

Open post

NTP Debuts Penta 721s Compact Dante Multiformat Converter and Router Series

NTP Debuts Penta 721s Compact Dante Multiformat Converter and Router Series

Penta 721s 1RU solutions all provide routing, AES, MADI and Dante I/O with either additional Dante capability, SDI embedding/de-embedding I/O or an open option card slot —

Gentofte, Denmark, September 24, 2020 — NTP Technology’s Enterprise-class Penta family of versatile, flexible and feature-packed digital audio multiformat converter/routers has expanded with three new compact models. Developed to bring Penta solutions to specific applications including broadcast and AV Install, the cost-effective 1RU Penta 721s, 721s-DNT and 721s-SDI allow multiple audio formats to co-exist with Dante networks.

All Penta 721s units offer over 400 connection and configuration options, seamlessly bridging AES, MADI and AES67-compliant Dante I/O with an onboard 512 x 512 router. The Penta 721s model has an open slot accommodating any of seven Penta I/O option cards which include additional AES, dual MADI, analog input, analog output, speaker DSP and delay for lip-sync processing modules that can be purchased as best suits a given application. For A/V, the new Crestron Module™ offers associability to routing and volume of all individual channels. NTP Technology’s DAD and Penta hardware is aligned around its DADman software, where control becomes fluid and transparent, including interleaving NTP solutions to expand AVID MTRX and MTRX Studio I/O (both built for AVID by NTP with DADman control) and also providing monitor control and I/O capability to AVID Dock, S1, S4 and S6 consoles, via the EUCON™ 3 protocol.

The Penta 721s-DNT is a Dante-to-Dante converter with onboard sample rate conversion on all inputs, which makes it ideal for connecting individual IP Audio networks that may run on different sample rates and digital clocks. While all 721s models natively include Dante connectivity in the form of a 64-channel Brooklyn II module, the 721s-DNT model is pre-fitted with the Penta 128-channel Dante module, also with onboard sample rate conversion in and out.

The Penta 721s-SDI adds Dual 3G SDI embedding / de-embedding to the package and is ideal for broadcasters with the need for combining SDI signals with Dante, MADI or AES. The SDI side of the model also has built-in sample rate conversion.

“The new Penta 721s models build on the legacy of the modular Penta 720 unit, which has proven its reliability in countless enterprise audio solutions throughout the world,” says Mikael Vest, Sales Director, NTP Technology. “So, we’re obviously excited to now add these new, compact and more cost-effective siblings to the Penta universe of audio-routing and conversion interfaces. We already know that AoIP will increasingly become the backbone of any larger enterprise audio facility, yet older audio formats will remain part of the systems for some time. With Penta 721s and Penta 721s-SDI we’re covering any existing audio format around, while Penta 721s-DNT is ready to engage any Dante/AES67-based system today or in the future.”

The new Penta 721s models, bringing affordable, Enterprise-level multiformat conversion and routing to a broader range of applications where the full flexibility of the Penta 720 is not required, will be available worldwide in October 2020. The Penta 721s has a MAP/MSRP USD price of $2799, with the 721s-DNT priced at $4320 and the 721s-SDI priced at $4620. All NTP products come with a two-year warranty, extended to three years upon product registration.

For more information, visit: ntp-us.com/penta/penta721s/

North American distribution via plus24: plus24.net

About NTP Technology

NTP Technology (www.ntp.dk) produces high-reliability audio routing and signal processing systems for major international broadcasters, audio mastering, editing and post-production studios under its Penta brand. DAD – Digital Audio Denmark (www.digitalaudio.dk), NTP Technology’s second brand, is renowned worldwide for analog-to-digital and digital-to-analog audio converters delivering outstanding sonic performance. Based in Copenhagen, NTP is part of the Dan Technologies Group, one of Europe’s leading suppliers of audio, video, transmission products and digital media solutions.

Contact for further information at NTP: 

Kurt Howell

National Sales Director, North America

kurt.howell@ntp.dk

Tel: (813) 422-1289

or

Mikael Vest

Sales Director, Denmark

mikael.vest@ntp.dk

Direct phone: +45 4596 8882

Open post

Hiltron Completes Fully Integrated TVRO Platform Control System for Nilesat

Hiltron Completes Fully Integrated TVRO Platform Control System for Nilesat

Hiltron Communications, a globally active satellite system integrator, manufacturer and distributor, announces the completion of a custom-designed turnkey TVRO satellite platform for Nilesat, one of the largest Middle East telecommunication networks. The new installation is a fully L-band-over-fibre integrated downlink which covers all mediator satellites in the range from 30° west to 100° east, operating in C and Ku bands simultaneously.

"Located at our ground station in Giza, the new downlink gives us the reliability and flexibility we needed for backing up our existing fixed TVRO antennas," says Nilesat Head of Ground Segment Engineer Osama Tantawy. "Incoming signals from all antennas on the new platform, 32 feeds in total, are connected to the master control room via fibre-optic links. Hiltron has produced and integrated a complete solution including its HMCS monitoring and control software. The company worked closely with us from initial design right through to factory acceptance test, onsite installation, commissioning and training. The project was completed successfully and on time thanks to the experience and teamwork of everyone involved."

"We are very pleased to have been chosen to work with Nilesat on this project," adds Hiltron Managing Director Antonio Monteverde. "The infrastructure we have provided includes a 3.7 metre motorised antenna with a Hiltron HMAM motorised mount and Hiltron HACU antenna control unit, RF-over-fibre links from RF Design, plus an LNB power supply and L band switch from ETL."

Hiltron’s HMCS monitoring and control application is designed to control all relevant satellite equipment in a master control room. It allows operators to control equipment from multiple vendors within a unified graphic display. HMCS also provides an SNMP interface to a high-level system. Advanced alarm message handling is included plus the ability to select stored profiles, transponders and slots from a database.

Hiltron's HMAM is a motorised satellite antenna mount designed for two-way satellite communication or receive-only downlink applications. It can be used in a wide range of roles including broadcast and telecommunication downlinks. An optional motorised feed changer allows the head to be moved quickly to a new position for switching between frequency bands. HMAM comes complete with professional-grade drives for azimuth and elevation plus a high-precision polarisation drive. The combined head and drive form a three-axis motorised mount with more than 270 degrees of azimuth adjustment, 90 degrees of elevation adjustment range and fully adjustable polarisation.

About Hiltron 

Hiltron Communications (www.hiltron.de) is a globally active system integrator, manufacturer and distributor in the field of satellite and wireless communication. The company operates from modern purpose-built headquarters at Backnang near Stuttgart. On-site facilities include a large technical operations area with high access doors and ceiling, capable of accommodating satellite-link vehicles and their roof-mounted antennas.

Contact for further information at Hiltron 

Antonio Monteverde

Tel: +49 (0)7191 343 570 | Email: antonio.monteverde@hiltron.de

Hiltron Communications, Emil-Rathenau-Str., 71522 Backnang, Germany

Tel: +49 (0)7191 343 570 | Fax: +49 (0)7191 3435 750

Open post

ATG Danmon Builds UHD Video Production Studios for Fidelity International

ATG Danmon Builds UHD Video Production Studios for Fidelity International


Accompanying images show Studio 1 at Fidelity International in London with its dynamic rear screen plus the production control gallery. 

ATG Danmon announces the completion of a UHD video production facility for the London headquarters of Fidelity International. The project was prompted by Fidelity's recent relocation to a new office building at 4 Cannon Street in the centre of the city's financial district.

"As a flagship location, the Cannon Street office needed to be a future-focused space," says Adam Sheldrake, Head of Studios at Fidelity International. "Good communication is essential to our business so we make full use of video media for internal communication, podcasting and participation in finance-related broadcasts. ATG has worked very successfully with us in projects at our previous London headquarters as well as designing and equipping studios at our Hong Kong offices. I have always been happy with what they have provided and how they have supported us. They responded to a proposal based on our initial specification but, because of their experience in past projects for us, were able to suggest a more cost-effective approach which also provided more functionality and included kit of superior specification. The result meets our highest expectations."

"We have designed, integrated and configured a full TV studio and production control gallery plus a podcast studio with its dedicated control room, edit suites and a green room," adds ATG Danmon Managing Director Russell Peirson-Hagger. "The project also included cabling through from the control areas to a technical apparatus room."

"The TV studio, Studio 1, is equipped with three broadcast-quality Blackmagic Ursa UHD cameras including Fuji lenses. These were chosen on the basis of their excellent value in terms of price and performance. Three of the cameras are mounted on Vinten robotic pedestals. Additional studio facilities include Kino-Flo and Dedolight luminaires, Autoscript on-camera prompting and Sennheiser wireless lavalier microphones. The studio backdrops are from Cirro Lite, mounted on Doughty supports. Audio monitoring is via Genelec powered loudspeakers."

"We have also installed a Panasonic UHD camera equipped with remote pan/tilt/zoom control. This can be used to capture wide angle or closeup images from a high, medium or low viewpoint to supplement the main studio cameras. An additional Panasonic camera with remote pan/tilt/zoom control is located in an outdoor housing on the roof to capture views of the City of London, primarily for use as scenery wall displays behind the studio participants. This level of robotic control allows the production process to be controlled very creatively and efficiently."

"At the core of the Studio 1 production control gallery is a Blackmagic ATEM UHD switcher with advanced chroma key capabilities that can be used to deliver a wide range of graphic effects. We have also integrated powerful titling software which can accept still or moving content in various industry standard file formats. Recording is to a Blackmagic HyperDeck Studio 12G capable of operating at up to 2160p60 UHD resolution over a single cable. This is supplemented by Apple iMac Pro graphics, a Yamaha QL1 audio mixing console and a Custom Consoles main control desk. We also recommended and integrated Custom Consoles MediaWall multiscreen video display mounting grids."

"The podcast studio, Studio 2, is fully equipped with lighting and prompting plus a Panasonic remote pan/tilt/zoom camera. The podcast control room has similar facilities to the Studio 1 production gallery, including a Black magic ATEM UHD vision mixer, a HyperDeck Studio 12G recorder, Autoscript prompting and a Custom Consoles control desk.

"For the green room, used primarily by guests prior to their studio appearance, we have integrated a 55 inch UHD video display with Genelec loudspeakers and RTS room-to-room audio communications."

"Much of the detailed processing equipment is housed in the primary technical room which includes Axon glue, Ross distribution amplifiers, Unifi networking, SNS EVO storage servers, a Quantum tape library with LTO-8 drives, Ross routing and NTP DAD audio interfaces."

"In summary, we have been able to deliver a sensibly costed and versatile production facility of very high quality, complete with staff training and all supporting documentation. We are confident that this system will have a long working life."

April 14th, 2020

About ATG Danmon

ATG Danmon (www.atgdanmon.co.uk), part of the Danmon Group (www.danmon.com), has been at the forefront of the transition to the file-based technology now used throughout the broadcast media industry. It has also assisted many clients in the construction of IT-based automated file workflow systems, high-definition studios, master control rooms and playout facilities, as well as the upgrade of existing SD systems to HD and UHD.

ATG Danmon also offers a comprehensive range of products and services including transcoding and automated workflow management, accelerated global file transfer, media workflow-design, project-planning, equipment installation, software-configuration, commissioning, documentation, on-site training plus ongoing support and maintenance.

With offices in Asia, Denmark, Germany, Norway, Portugal, Spain, Sweden and the United Kingdom, the Danmon Group thinks globally and acts locally to support customers with its highly experienced sales and engineering teams.

Contacts for further information

ATG Danmon: Russell Peirson-Hagger

Email: russell.peirson-hagger@atgdanmon.co.uk

Tel: +44 (0)1462 485 444

Danmon Group United Kingdom, Unit 5, Oakfield Business Corner, Works Road, Letchworth SG6 1FB, UK

Tel: +44 (0)1462 485 444

Fax: +44 (0)1462 485 777

Web: www.danmon.com

Open post

ATG Danmon Completes New HD/UHD Production System for That Lot

ATG Danmon Completes New HD/UHD Production System for That Lot

ATG Danmon announces the completion of a broadcast-quality production facility for the London headquarters of That Lot, one of Europe's leading providers of social media content production support. Core of this project is a multi-camera studio plus a fully equipped control room including lighting, vision and audio mixing, routing, recording, monitoring and archiving.

"Working with ATG Danmon, we have been able to create the most flexible possible system for use across our wide range of creative services," comments Ben Forder, Head of Video at That Lot. "The new studio and its control suite enable us to offer our clients versatile resources for creating broadcast-quality content for a wide range of media applications."

"A full-colour back-lit LED cyclorama, which we believe is the first of its kind in Europe, provides sharp chroma-key superimposition onto on any background. Lighting is from a ceiling-mounted rig which can be adjusted to get the exact style of illumination we need for live-streaming or recording sketches, scripted videos, interviews, podcasts, vodcasts and social media photoshoots. That includes 360 degree surround video and audio capture if specified."

"ATG Danmon has also integrated a control room suite which is being used for live production and editing. External material can be sourced from wherever required or we can perform high quality production on location. The system is intuitive to operate which is especially important when working live, and highly versatile."

"This was a very pleasing project to work on, partnering with That Lot's very astute and focused production team," adds ATG Danmon Managing Director Russell Peirson-Hagger. "The studio is equipped with Blackmagic Design URSA UHD cameras which can be operated in a wide range of lighting levels and are ideal both for studio and outdoor operation. Production mixing and internal signal distribution are via an ATEM Studio HD switcher and Smart Videohub UHD-capable router, capturing to Softron recorders and SNS EVO networked storage."

"We have also integrated Apple iMac Pro computers for post-production. Additional facilities include Cirro Lite lighting, multiscreen as well as individual video monitors, a studio floor monitor, green room monitor, Allen & Heath digital audio mixer, a Custom Consoles control room desk and Sonifex talkbacks."

Contact for further information:

ATG Danmon
Russell Peirson-Hagger
Tel: +44 (0)1462 485 444
russell.peirson-hagger@atgdanmon.co.uk

Address:

ATG Danmon
Unit 5, Oakfield Business Corner, Works Road, Letchworth SG6 1FB, UK
Tel: +44 (0)1462 485 444
Fax: +44 (0)1462 485 777
Web: www.danmon.com

Open post

Hiltron Integrates Large-Scale High-Throughput Satellite Monitoring System

Hiltron Integrates Large-Scale High-Throughput Satellite Monitoring System

Hiltron Communications announces the conclusion of a major systems integration project for a leading European satellite network operator. The new systems have been delivered to 50 sites around the world where they are being used for continuous quality of service monitoring of high-throughput satellites.

Hiltron has supplied each of the 50 sites with a compact 12U rack populated with the monitoring equipment. The systems delivered are located at monitoring sites across North America, South and Central America, Asia, Europe, and Africa.

Each system includes a Hiltron HCS-4 satellite communication controller which is designed to form the central control element for a wide range of satcom applications. These include switchover between devices such as downconverters, high power amplifiers, waveguides, MPEG digital video broadcast encoders and integrated receiver/decoders.

The HCS-4 can also be used to control and monitor optical-fibre transceivers and antenna heaters. Other features include an N-1 redundancy switch and BUC/HPA controller, an LNB supply, a 2-1 LNB redundancy switch controller, plus a GPS-synchronised fully redundant low-noise 10 MHz reference generator.

Hiltron's HCS-4 satellite communication controller is available as a 2U high 19 inch rack mount unit with main and backup power supplies plus 13 slots for active modules. Also available are two chassis mountable frames accommodating up to 6 or up to 14 active modules.

All three versions can be powered from 24 volts DC and are operated via an intuitive HTML-based graphic interface. Modules are hot-pluggable to allow easy exchange. Any new or replaced module is automatically sensed and its address registered. All units in the family have SNMP remote control, hot-swappable dual redundant power supply and an internal data bus.

Founded in 1979, Hiltron Communications (www.hiltron.de) is a world leading satcom equipment manufacturer and system integrator operating from modern purpose-built headquarters based in Backnang near Stuttgart. Hiltron's ISO 9001 certified on-site facilities include a purpose-designed integration area for ground systems, large antenna solutions and SNG vehicles. Hiltron also has its own research and development department and satellite antenna test plant. Customers can rely on Hiltron's experience in designing system solutions using the company's own and various multivendor products. Hiltron offers a wide range of customer-focused services covering every aspect of the modern satellite communication business.

Contact for further information:

Hiltron Communications
Antonio Monteverde
Tel: +49 (0)7191 343 570
Email: antonio.monteverde@hiltron.de

Address:

Hiltron Communications
Emil-Rathenau-Str. 1
71522 Backnang
Germany
Tel: +49 (0)7191 343 570
Fax: +49 (0)7191 3435 750
Web: www.hiltron.de

Posts navigation

1 2